1.1 This standard establishes environmental test methods for equipment intended for use in aerospace and ground environments as defined herein. The test methods herein shall be used to determine compliance with equipment specifications and shall not be used as design specifications.
1.2 This document is applicable to all aeronautical and ground support equipment procured by or for the Department of Defense. It supersedes prior documents issued under the authority of the respective Services where such documents conflict with the requirements herein stated.
92 NATO Stock Numbers in Federal Supply Classification 5210 (Measuring Tools, Craftsmen's), part of the Measuring Tools supply group. All items are available from Dibblee Industries.
| NSN | Description |
|---|---|
| 5210-00-078-8948 | Square, Combination 12.000" Grooved Blade |
| 5210-00-189-9534 | Gage Cap Setting 0.015" Dia Wire, Fixed W/gap Adjuster, Metal Holder |
| 5210-00-221-1999 | Gage, Thickness,english Tapered, 26 Blades 3' Lg |
| 5210-00-221-2077 | Gage, Telescoping, 3.500 in to 6.000in Gaging Range, Self Centering Handle |
| 5210-00-221-2084 | Gage, Telescoping 0.312 to 0.500 in Paging Range, Self Centering Handle, Fed |
| 5210-00-221-2085 | Gage, Telescoping, 0.500 in to 0.750 in Gaging Range, Self Centering Handle |
| 5210-00-221-2086 | Gage, Telescoping 0.750" to 1.250" Gaging Range Supplier:p/n 3b 58 |
| 5210-00-221-2087 | Gage, Telescoping, 1.250in. to 2.125 In. Gaging Range Self Centering Handle |
| 5210-00-222-4000 | Gage, Center, Tool Setting, and Grinding Type; 60 Deg Uss Screw Thread Male |
| 5210-00-233-5460 | Gage, Fillet and Radius |
| 5210-00-266-7042 | Dividers, Mechanics Spring Type 3 In. Lg Steel, Solid. |
| 5210-00-299-3026 | Caliper, Hermaphrodite |
| 5210-00-532-8050 | Caliper Vernier |
| 5210-00-869-0466 | Magnetic Holder, Dial |
| 5210-00-897-6077 | Tape Radio Frequency Measuring 156ft Lg; Grad in Ft, Tenths and Half |
| 5210-00-971-8827 | Rule, Steel, Machinist's 6.000 in Lg 0.500 in Max w 0.013 in Nom Thk; Flexible |
| 5210-01-008-3623 | Caliper Micrometer Inside, Rod Type 1.500 to 36 in Range 0.0001 in Graduation |
| 5210-01-166-1977 | Rule |
| 5210-01-167-4284 | Indicator |
| 5210-01-188-9125 | Tape Measuring Steel Main Body 0.800 to 6" with Vernier Scale Reading to |
| 5210-11-638-0211 | Level and Plumb |
| 5210-21-102-1647 | Meterstick, Wood 1mm and 1/8" Grad; 0.312" Nom Thk Square Edges |
| 5210-21-102-5584 | Indicator, Dial. 0.001 In. Graduations, |
| 5210-21-104-9083 | Gage, Cylinder2 To6 in Range, Ridged Handle |
| 5210-21-104-9641 | Caliper, Micrometer, Outside 6 to 12 In, Gaging Range 0.001 in Grad W/ Racket |
| 5210-21-104-9651 | Caliper, Micrometer, Outside 225 to 250mm Range 0.001 Mm Grad. W/ratchet |
| 5210-21-105-1581 | Head, Pratactor, Combination |
| 5210-21-105-2783 | Square Combination, 12.000' Nom Lg Grooved |
| 5210-21-108-7928 | Gage, Thickness, English Str 10 Blades Supplier:p/n 3001-0460 |
| 5210-21-108-7933 | Gage, Gap Setting |
| 5210-21-111-2265 | Level |
| 5210-21-638-0011 | Caliper, Inside 6000 In. Nom Size, Firm Joint, Polishedsteel, Rectangular Legs. |
| 5210-21-638-0028 | Caliper |
| 5210-21-638-0047 | Caliper, Outside, Spg Joint , 10 In. Nom Si Ze Split Nut Adjust Rect Legs, Cgsb |
| 5210-21-638-0055 | Caliper, Micrometer |
| 5210-21-638-0082 | Caliper, Micrometer, Outside 0 to 1" Gaging Range |
| 5210-21-638-0083 | Caliper |
| 5210-21-638-0087 | Caliper |
| 5210-21-638-0090 | Caliper |
| 5210-21-638-0106 | Caliper |
| 5210-21-638-0108 | Dividers |
| 5210-21-638-0110 | Dividers, Mechanics, Spring Type. |
| 5210-21-638-0123 | Gage, Caliper, Rule |
| 5210-21-638-0132 | Gage |
| 5210-21-638-0135 | Indicator, Dial |
| 5210-21-638-0137 | Gage, Drill Point |
| 5210-21-638-0176 | Blade, Thickness Gage, English Ref: 39gp35a |
| 5210-21-638-0218 | Level & Plumb 9" Lg Wood Single Face Non Adjustable Harmon 508-f |
| 5210-21-638-0241 | Rule Steel 4" Lg 5/8" Wide |
| 5210-21-638-0242 | Rule, Stl, Machinists 6" Lg 0.750" w 0.042" Thk Rh Reading 59 |
| 5210-21-638-0249 | Rule, Steel, Mechinists |
| 5210-21-638-0250 | Rule, Steel |
| 5210-21-638-0258 | Squared, Carpenter's 24" Lg Body 16" Lg Tongue Polished Steel 1/8" Grad |
| 5210-21-638-0261 | Square Combination 12 in Grooved Blade Cast Iron Square Miter Head. |
| 5210-21-638-0262 | Square Combination 12,000 in Groove D Blade, Steel Square/ Miter Head. |
| 5210-21-638-0310 | Tape Measuring 100 Ft Max |
| 5210-21-638-0407 | Caliper, Micrometer |
| 5210-21-638-0410 | Caliper |
| 5210-21-801-0519 | Rule, Stl Machinists 15cm Lg 18mm w 1mm Thk |
| 5210-21-801-6333 | Gage, Telescoping 2.125 to 3.500" Gaging Range |
| 5210-21-801-6357 | Rule, Steel |
| 5210-21-801-6359 | Rule, Steel |
| 5210-21-801-6360 | Rule Steel Machinist's |
| 5210-21-805-0960 | Caliper Set |
| 5210-21-809-8669 | Caliper |
| 5210-21-810-0040 | Caliper, Outside, Spg Joint 8" Nom Sz |
| 5210-21-810-0102 | Head, Square and Miter Combination Square |
| 5210-21-810-0103 | Head, Center Combination, Square |
| 5210-21-811-0050 | Indicator |
| 5210-21-811-0205 | Gage, Depth Micrometer |
| 5210-21-840-0110 | Caliper Set |
| 5210-21-840-0488 | Caliper Set |
| 5210-21-842-7758 | Gage, Twist Drill, Ltr Sz Type a to Z Range Supplier:p/n 5053 |
| 5210-21-844-4557 | Rule, Stl, 12" Lg 0.500" w 00016" Thk |
| 5210-21-845-1592 | Tape Measure |
| 5210-21-852-8965 | Caliper Dial |
| 5210-21-852-9862 | Gage Set Telescoping |
| 5210-21-860-7596 | Tape Measuring 100 Ft Grad Lg |
| 5210-21-865-0539 | Tape Measure |
| 5210-21-866-3084 | Chalk Line and Reel 100ft Line Self Chalking |
| 5210-21-866-8701 | Blade Combination |
| 5210-21-866-8937 | Caliper |
| 5210-21-868-0729 | Caliper, Vernier, Engl/metric 0 to 48" & 0 to 1220mm Outside Range |
| 5210-21-870-9992 | Level and Plumb |
| 5210-21-878-4379 | Caliper Gage Indicator |
| 5210-21-882-9766 | Gage, Height, Venier |
| 5210-21-883-0032 | Gage, Thickness, Nonmagnetic 6 Str Blades Supplier:p/n 3123-0450 |
| 5210-21-883-0802 | Gage, Thickness, Metric, Str, 9 Blade W/blade Lock |
| 5210-21-886-9800 | Caliper |
| 5210-21-903-3988 | Caliper |
| 5210-21-904-2022 | Radius Line Assembly 27' Line Length C/o Spool with Radius Line, Secured |
| 5210-21-907-6458 | Tape, Measuring 25ft Max Grad Lg General Purpose |
Need items from FSC 5210?
Dibblee Industries supplies NATO-cataloged measuring tools, craftsmen's to government and industrial clients across Canada.
Request a Quote Call 1.514.694.9830