1.1 This standard establishes environmental test methods for equipment intended for use in aerospace and ground environments as defined herein. The test methods herein shall be used to determine compliance with equipment specifications and shall not be used as design specifications.
1.2 This document is applicable to all aeronautical and ground support equipment procured by or for the Department of Defense. It supersedes prior documents issued under the authority of the respective Services where such documents conflict with the requirements herein stated.
416 NATO Stock Numbers in Federal Supply Classification 5120 (Hand Tools, Non-edged, Non-powered), part of the Hand Tools supply group. All items are available from Dibblee Industries.
| NSN | Description |
|---|---|
| 5120-00-061-9310 | Wrench Socket 1/4" Int Sq Drive 9/16" Nom Size 12 Pt Wrench Opening Reg Lg |
| 5120-00-104-1777 | Key Socket Head Screw Size 7/32" Hex 6" Blade Lg 10-1/8" Lg O/a |
| 5120-00-113-0042 | Wrench Torque Preset |
| 5120-00-180-2937 | Clamp Screw Quick Adjusting Souble Jaw 48" Nom Jaw Opening |
| 5120-00-188-1832 | Flatter, Blacksmith's |
| 5120-00-203-4767 | Socket Wrench Nonsparking & Nom Magnetic 0.500" Sq Dr |
| 5120-00-203-6436 | Clamp, C. Light Service |
| 5120-00-221-1542 | Awl, Scratch 3 1/2" Blade Lg Supplier Sz 2 |
| 5120-00-221-2086 | Gage Telescoping 0.750 - 1.250" Range |
| 5120-00-221-8026 | Socket Wrench Nonsparking & Nom Magnetic 0.500" Sq Dr |
| 5120-00-222-1302 | Jack, Hydraulic, Hand, 8-ton Cap Wjk P/n Db60801 |
| 5120-00-223-1945 | Vise Swivel Type 6w X 9" Opening |
| 5120-00-223-6838 | Palm, Sewing, Seaming Type Rh Ref: 266 |
| 5120-00-224-7516 | Jack, Rack Bar 15 Ton Rated Cap Spec: Gggj51e |
| 5120-00-228-9504 | Wrench, Box and Open End Combination Offset 47 |
| 5120-00-228-9505 | Wrench, Box and Open Combination Offset |
| 5120-00-228-9506 | Wrench, Box and Open End Combination Offset |
| 5120-00-228-9507 | Wrench, Box and Open End Combination Offset |
| 5120-00-228-9508 | Wrench, Box and Open End Combination Offset |
| 5120-00-228-9509 | Wrench, Box and Open End Combination Offset |
| 5120-00-228-9510 | Wrench, Box and Open End Combination |
| 5120-00-228-9511 | Wrench, Box and Open End Combination |
| 5120-00-228-9512 | Wrench, Box and Open End Combination |
| 5120-00-228-9513 | Wrench, Box and Open End Combination |
| 5120-00-228-9514 | Wrench, Box and Open End Combination |
| 5120-00-228-9516 | Wrench, Box and Open End Combination |
| 5120-00-236-3679 | Hammer, Hand, Sledge, H133-8lb |
| 5120-00-240-5330 | Tools Disc - Socket Wrench |
| 5120-00-242-3789 | Holder, Sheet Metal, Hole. Forceps Operated |
| 5120-00-256-0651 | Punch and Die Grommet Inserting Size 4 Eyelet Type Mil-p-16208 Type 1 |
| 5120-00-257-0304 | Digging Bar, 1" Nom. Stk Dia, 59-3/4" Nom Lg O/a, Chisel Pt & Blunt End |
| 5120-00-264-3795 | Wrench, Adjustable, Open End |
| 5120-00-264-3796 | Wrench, Adjustable, Open End |
| 5120-00-277-6470 | Wrench, Adjustable Open End Ref: 7341 |
| 5120-00-288-6560 | Handle, Hammer 16" Length, Cgsb 39gp10m |
| 5120-00-293-1608 | Screwdriver Flat Tip Nonsparkind and Non-magnetic |
| 5120-00-293-2333 | Anvil 200lbs Wt, Hardie Hole 1-1/4"; Pritchel Hole 1/2" Dia; Face 16-1/2 X 4-1/4 |
| 5120-00-293-2501 | Bar Bucking Rivet 1" Rect End with 1-7/8" Rect End H, 2-1/4" O/a H, 6-3/8" O/a Lg |
| 5120-00-293-2931 | Puller, Mechanical Wjk P/n 4002 |
| 5120-00-293-3382 | Holder, Sheet Metal, Hole, 1/4" Nom Rivet Sz |
| 5120-00-370-1289 | Wrench , Tommy |
| 5120-00-423-6728 | Wrench, Adjustable, Steel, Chromium Plated |
| 5120-00-448-3621 | Wrench Spanner Nonadjustable Lug Double End |
| 5120-00-448-3718 | Wrench Tommy 3.250 (3-1/4") Nom Lg |
| 5120-00-448-3924 | Hook, S[pring Adjusting |
| 5120-00-528-2891 | Holder, Screwdriver Bit Female Square Drive, Hex Socket |
| 5120-00-528-2892 | Holder, Screwdriver Bit, Female Square Drive, |
| 5120-00-541-1808 | Holder, Sheet Metal, Hole. Forceps Operated |
| 5120-00-545-4268 | Retriving Tool Magnetic Telescoping Type 15.25 to 18.00" Closed Lg 27.00" Nom |
| 5120-00-555-2077 | Face, Hammer, Inserted. |
| 5120-00-555-7817 | Puller Mechanical Gear and Bearing Single End Grip, 2 Jaw, Ext. |
| 5120-00-595-8424 | Puller Attachment, Mechanical Bearing |
| 5120-00-595-9562 | Socket, Socket Wrench Nonsparking and Non Magnetic |
| 5120-00-596-2893 | Bit, Screwdriver |
| 5120-00-596-4426 | Wrench Open End Double Head 0.625 and 0.750 (5/8 and 3/4") Nom Sizes 15 Deg |
| 5120-00-605-9426 | Adapter, Wrench, Ratchet, Far Installing. |
| 5120-00-605-9427 | Adapter, Nose |
| 5120-00-613-7438 | Adapter Wrench Nose for Installing F164 Series Jo-bolts Lok-fast Inc. 48 |
| 5120-00-613-7441 | Adapter Wrench Nose for Installing P164 Series Jo- Bolts Lok- Fast Inc. |
| 5120-00-613-7447 | Adapter, Nose |
| 5120-00-629-5636 | Ram Third Stage |
| 5120-00-640-6733 | Bit, Screwdriver, Male Hex, Tip |
| 5120-00-675-0867 | Screwdriver, Cross Tip Torque Set Tip Plastic Handle. |
| 5120-00-714-7400 | Screwdriver, Cross Tip, Torque Set Tip Plastic Handle. |
| 5120-00-779-4479 | Wrench, Ratchet Supplier P/n 412-281 |
| 5120-00-779-4483 | Wrench, Ratchet Supplier P/n 412-438 |
| 5120-00-863-4942 | Bit, Screwdriver, Flat Tips Sides, Fem Sq. Dr. Shank 0.375 (3/8) in Nom Fem Sq. Dr. |
| 5120-00-863-4943 | Bit, Screwdriver Flat Tip - Apex Machn Ref Hts-4a |
| 5120-00-873-3998 | Hook, Spring Push |
| 5120-00-884-3028 | Puller Mechanical |
| 5120-00-888-5827 | Bit, Screwdriver |
| 5120-00-888-5828 | Bit Screwdriver Torque Set Cross Tip, 5/16 Size 5/16" Male Str Hex Drive Shank |
| 5120-00-888-5829 | Bit, Screwdriver Torque Set Cross Tip No.4 Tip Sz - Apex Machn Ref 212-4 |
| 5120-00-888-5834 | Puller Mechanical |
| 5120-00-889-6263 | Screwdriver, Jewellers, Swivel Knob Removable Blade, 0.025 In. U Tip. |
| 5120-00-891-3555 | Wrench, Pipe 0.250 to 2.000 in Ips Capacity 18000 in O/a Lg |
| 5120-00-903-8938 | Bit Screwdriver, Flat Tip 17/64 in W, 1/4 in Wa/f 1.0 Innom Lg O/a. |
| 5120-00-937-5438 | Installing Tool |
| 5120-00-946-5148 | Cable Grip P/n Eqa68ph |
| 5120-00-946-5184 | Grip, Cable, Woven, Open End, Hook-on Type, Single Wheave, Bronze 0.540 |
| 5120-00-962-8342 | Swaging Tool, Screw Thread Insert 3.000 In. Lg O/a Alloy Steel, Heat Treated |
| 5120-00-971-5537 | Wrench, Socket |
| 5120-01-010-5502 | T-handle, Nutdriver. Reversible Ratchet Type Plasticead Wt 39-gp-2a Type 6 |
| 5120-01-014-7034 | Bender Cable Hand 10" Extension Wrench Bending Shoe Assy C/w Metal Case |
| 5120-01-018-8956 | Screwdriver Bit Set, and Handle. Ballpoint Hex Nom Head Wt 39-gp-2a Type 6 |
| 5120-01-023-4415 | Collar Removal, Spare for Cp140 to Remove Collars On Hi-lok Pins. |
| 5120-01-023-4416 | Collar Removal, Spare for Cp140 to Remove Collars On Hi-lok Pins. |
| 5120-01-039-6327 | Key Extractor |
| 5120-01-053-7937 | Drill Stop |
| 5120-01-065-9037 | Mallet, Plastic, Compothane, Hard Duro Rating 3 Lbs O/a Weight 2.500 in Dia |
| 5120-01-068-1560 | Pin Drift 1/2x6 O/a Lg |
| 5120-01-070-5486 | Extractor |
| 5120-01-079-8045 | Bit Screw Driver Male Hex Tip 1.5mm A/f, 127mm Lg O/a |
| 5120-01-079-9644 | Key Socket Hd Screw Hex Blade W/scrw Driver Handle Steel Blade 4mm |
| 5120-01-094-0027 | Drill Stop, No 40 Drill Sz Supplier P/n Ds40 |
| 5120-01-165-4784 | Blowtorch, Kerosine P/n 353 6196-802 |
| 5120-01-166-2000 | Adaptor Part Number 4537408-116 |
| 5120-01-176-1819 | Wrench Set Consisting of 23 Wrenches and Kit Bag |
| 5120-01-188-2954 | Mirror Inspection 3.00" Nom Lg By 2.00" Nom Width 16.00 to 18.00" Max Length |
| 5120-01-232-0002 | Wrench, Oil Filter Supplier P/n J24783 |
| 5120-01-243-5482 | Wrench, Spanner 49 |
| 5120-01-285-4314 | Inserter Amd Remover, Stud |
| 5120-01-291-6156 | Socket, Crowfoot Wrench Head Supplier P/n J21545 |
| 5120-01-291-6900 | Adapter, Torque Wrench Supplier P/n J28462 |
| 5120-01-292-4883 | Crimping Tool Sheet Metal Pipe Hand |
| 5120-01-306-2171 | Socket, Socket Wrench. Size 11.11mm 12 Pt, 19.05mm Dr, 25.4 Mm Lg O/a |
| 5120-01-306-2175 | Socket Socket Wrench 19.05 Mm Single End Drive Size 30mm Hex 323.85 Mm Lg |
| 5120-01-375-6133 | Torque Wrench 1/4" Drive 0 to 90 Cm-kg Scale Graduations, Sial Indicator |
| 5120-01-385-6016 | Pin, Extraction Tool P/n Cuta1871104b |
| 5120-12-120-3955 | Puller Ratchet |
| 5120-12-120-9361 | Key, Socket Head Screw, Hen Type Supplier P/n Upc 59610 |
| 5120-12-120-9362 | Key, Socket Head Screw, Hex Type Supplier P/n 59660 |
| 5120-12-120-9363 | Key, Socket Head Screw, Hex Type Supplier P/n 59630 |
| 5120-12-120-9602 | Wrench Open End Dlb Head 24 and 26mm Sizes 15.0 Deg Angle Heads |
| 5120-12-123-5066 | Wrench Open End Double Head 19 and 22mm Sized 15.0 Deg Angle Heads 8mm |
| 5120-12-123-5131 | Wrench, Open End. |
| 5120-12-123-5264 | Wrench Open End Box Flare Nut 24 and 27mm Sizes Deg Angle Heads |
| 5120-12-123-5314 | Key, Socket Head Screw, Hex Type Supplier P/n 59680 |
| 5120-12-123-5316 | Key, Socket Head Screw, Hen Type Supplier P/n Upc 59612 |
| 5120-12-123-5319 | Key, Socket Head Screw, Hex Type Supplier P/n Upc 59619 |
| 5120-12-123-5320 | Allen Hex Wrench .22m |
| 5120-12-123-5544 | Wrench Box and Open End 21mm |
| 5120-12-126-3007 | Drag Link Socket P/n 405a |
| 5120-12-126-3169 | Wrench Torque 28kn to 76kn Torque Capacity 3/4" Square Drive Fixed End, |
| 5120-12-132-2732 | Wrench Socket 1/2" Sq Dr Size 10mm 6 Pt Hex Bit |
| 5120-12-133-3600 | Wrench Open End Sozer 12 X 13mm 160mm O/a Lg T |
| 5120-12-133-8165 | Pliers Retaining Ring Int Flat Jaws Str Tips |
| 5120-12-144-5314 | Mallet |
| 5120-12-150-1846 | Wrench Torque, Special Article 699888 Dremometer Dx Ref; P/n |
| 5120-12-166-0268 | Key Socket Head Screw Size 3mm 20mm Short Art Lg 66.0 Mm Nom Lg O/a |
| 5120-12-166-0325 | Key Socket Head Screw Screwdriver Type Plastic Handle Size 5mm Ball Tip |
| 5120-12-168-7910 | Socket Wrench Attachment, Screw Driver A6709m-4 |
| 5120-12-170-6501 | Key Socket Hd Screw 10mm Size 200mm Lg 260mm O/a Lg |
| 5120-12-176-1093 | Centering Tool |
| 5120-12-176-1106 | Drift |
| 5120-12-176-1112 | Support |
| 5120-12-185-0753 | Wrench Torque 12.5 Mm Dr 20 to 200 Newtonmeter Torque Cap 520mm Lg |
| 5120-12-190-9039 | Wrench, Socket |
| 5120-12-190-9040 | Wrench,socket |
| 5120-12-190-9519 | Wrench, Torque |
| 5120-12-194-0817 | Insert Tool Open End 32mm P/n 7118-32 |
| 5120-12-194-7238 | Inserter Bearing and Bushing |
| 5120-12-308-0452 | Key, Socket Hd Screw Plastic Handle 12.0 Mm Size 325 M O/a Lg 50 |
| 5120-12-310-0443 | Wrench, Torque 10mm 5 to 60 Newtonmeter Torque Cap. |
| 5120-12-312-2165 | Thrust Pad |
| 5120-12-312-2169 | Installer Bearing |
| 5120-12-317-7747 | Wrench Set, Socket |
| 5120-12-893-0979 | Wrench Torque P/n 4201-01 |
| 5120-17-005-6045 | Accessory M3, Pin Extractor P/o Tool Kit Mgk 7/2 U/o Radar Antenna Lwo3. |
| 5120-17-046-5042 | Trim Tool |
| 5120-17-049-8553 | Trim Tool |
| 5120-17-050-4210 | Adjusting Tool |
| 5120-17-053-4553 | Extractor |
| 5120-17-103-6890 | Wrench, Torque |
| 5120-21-102-3074 | Wrench, Open End, Thin Double Head, Ref: 23535 (singer Co) |
| 5120-21-102-3391 | Clamp, Cantilever Jaw, 6.000 In. Nom Size, 5.500 (5-1/2) in Dp Throat, Fed Gg |
| 5120-21-102-7485 | Grip, Cable Woven Closed End |
| 5120-21-102-7486 | Grip Cable Woven 2"-2-1/2" 27200 Lbs Design Strength |
| 5120-21-102-7487 | Hook Manhole Cover |
| 5120-21-102-8195 | Pliers, Hog Ring Staple Str Nose Medium Ring Type, Closes Right Prong Over |
| 5120-21-103-7676 | Shovel Hand Snow/barn Blade 10-9/16 X 11-3/4 30.000 Inc Nom Lg O.a Alum Blade |
| 5120-21-104-3660 | Wrench Open End 3-3/4" Opening X 19-3/4" Long |
| 5120-21-104-9300 | Shovel Aluminum 11-13/16 X 14-5/8 Blade 50" O/a Lg |
| 5120-21-104-9396 | Bar Wrecking Non Sparking |
| 5120-21-105-1577 | Mallet Head 3-1/2" Dia Size of Face 6" Long |
| 5120-21-105-1608 | Hook, Material Handling. Base, 4" Nom Jaw w |
| 5120-21-105-1610 | Hook, Material Handling. Hand Forged Steel W/wood Handle |
| 5120-21-105-1792 | Marker, Stitch Spacing 7 Stitch, Straight Shank Stitching Punch Type |
| 5120-21-105-1914 | Pick Digging |
| 5120-21-105-1916 | Pincers, Casting |
| 5120-21-105-2404 | Screwdriver, Clutch Tip, Type a Tip Plastic Handle |
| 5120-21-105-2407 | Screwdriver, Cluth Tip, Type a Tip. Plastic Handle 1/4 In, Dia.tip 6 In. Lg. Blade. |
| 5120-21-105-2685 | Socket, Socket Wrench, 1/4 ' Sq. Dr. 0.413' |
| 5120-21-105-2688 | Socket, Socket Wrench, 1/4" Sq Dr. 0.282 In. |
| 5120-21-105-3268 | Vise Machinists, Stationary Base |
| 5120-21-105-3590 | Wrench, Open End. Double Head, 21.000 and 23.000 Mm Sizes, 15 Deg Angle Heads, |
| 5120-21-105-3607 | Wrench, Pipe Adjustable Jaw Style |
| 5120-21-105-3618 | Wrench, Pipe, Internal Gripping 1.000 In. Nom Ips, Eccentric Cam,1.000 In. Min. |
| 5120-21-106-1182 | Step Plate, Pulling Adaptor |
| 5120-21-107-4734 | Digger Posthole Hinged Handle and Lever Type 65 In. Lg. O/a Garant Inc. |
| 5120-21-108-7905 | Block, Dolly, Sheet Metalworking, Wedge Type. |
| 5120-21-108-8418 | Jack, Hydraulic, Hand 3 Ton Rated Cap Supplier P/n 5-51002 |
| 5120-21-108-8632 | Wrench Open End Double Head 17mm & 19mm |
| 5120-21-108-8670 | Jack, Hydraulic Hand 30.000 Ton Rated Cap Self-containing Double Pump |
| 5120-21-108-9144 | Puller Attachment, Mechanical, Bearing Ext 1 to 7-1/2 In. Spread Range, 7-1/8 |
| 5120-21-108-9284 | Bender Electrical Conduit Hand Fixed Radius Type 1 in Size 51 |
| 5120-21-108-9468 | Bar, Digging & Tamping |
| 5120-21-109-6397 | Socket Wrench Attachment, Socket Head Screw 0.375 (3/8) in Nom Int Sq Dr |
| 5120-21-111-1209 | Tube Bender |
| 5120-21-111-9854 | Pliers, Belt Repair Ref: Tk 295 |
| 5120-21-112-2701 | Auger, Earth Boring, Hand, 1-1/2" Bit Dia. 48" O/a Lg. Soilest Inc. Ref A4. |
| 5120-21-120-9363 | Key, Socket Head Screw, Hex Type Supplier P/n Upc 59630 |
| 5120-21-121-4791 | Wrench, Open and Double Head, 32.000 And36.000 Mm Sizes, 15.0 Eeg Angle 11.000 |
| 5120-21-255-4476 | Tip, Screwdriver 4.5 Mm |
| 5120-21-255-4477 | Tip, Screwdriver 2mm Hex |
| 5120-21-255-4478 | Tip, Screwdriver 3mm Hex |
| 5120-21-255-4479 | Tip, Screwdriver. No.1, Pozidrive |
| 5120-21-255-4480 | Tip, Screwdriver 5mm |
| 5120-21-255-4596 | Wrench Pipe Aluminum 18" Lg 2-1/2" Cap |
| 5120-21-255-4597 | Wrench Pipe Aluminum 10" Lg 1-1/2" Cap |
| 5120-21-255-4598 | Wrench Pipe Aluminum 14" Lg 2" Capacity |
| 5120-21-255-4746 | Pliers, Slip Joint |
| 5120-21-560-1770 | Socket, Socket Wrench |
| 5120-21-583-0744 | Combination Tool. Fibe Fighters, C/o Door Opener, Crowbar Hammer and |
| 5120-21-585-9005 | Extractor, Stuffing Box & Pump Packing Supplier P/n 1204-1 |
| 5120-21-585-9010 | Extractor, Stuffing Box and Pump Packing Crew and Flexible Shaft Type 11 |
| 5120-21-585-9015 | Extractor Stuffing Box |
| 5120-21-585-9105 | Extractor, Stuffing Box and Pump Packing Screw and Flexible Shaft Type |
| 5120-21-638-0106 | 11306 Caliper, Vernier |
| 5120-21-638-0262 | Square, Combination 12.000" Grooved Blade P/n 7118-012h |
| 5120-21-638-0407 | Caliper, Micrometer, Outsidew 0.000 in to 1.000 in Gaging Range. |
| 5120-21-639-0052 | Wrench, Open End, Nonsparkling and Non Magnetic |
| 5120-21-639-0053 | Wrench Open End Non Sparking Single Head 1-1/16" Nom Size 15 Dg Angle Head |
| 5120-21-639-1303 | Wrench, Box and Open End, Combination Offset 0.250 (1/4) in Size Both Ends |
| 5120-21-639-1360 | Wrench, Box. Double Offset, Double Heads, 5/8" and 11/16" (12 Pt. Heads) Chr |
| 5120-21-639-1376 | Wrench, Box |
| 5120-21-639-1662 | Wrench, Pipe, Chain |
| 5120-21-639-1717 | Wrench Pipe |
| 5120-21-639-1719 | Wrench Pipe |
| 5120-21-639-1720 | Wrench Pipe Str Jaw |
| 5120-21-639-2048 | Socket, Socket Wrench |
| 5120-21-639-2049 | Socket, Socket Wrench |
| 5120-21-639-2166 | Socket , Socket Wrench |
| 5120-21-639-2169 | Socket, Socket Wrench. |
| 5120-21-639-2171 | Socket, Socket Wrench |
| 5120-21-639-2174 | Socket, Socket Wrench |
| 5120-21-639-2309 | Driver, Glaziers Diamond Pt |
| 5120-21-639-2618 | Wrench, Torge |
| 5120-21-639-2700 | Wrench, Box, Single Head Offset 52 |
| 5120-21-639-2748 | Wrench Spanner for Handwheels |
| 5120-21-639-2749 | Wrench Spanner 16" O.a.l. to Open or Close 12 to 16 In. Dia Valve Hand Wheel |
| 5120-21-639-2902 | Wrench, Ratchet, Reversible, Reversing Mechanism in Head, Open Type |
| 5120-21-639-3031 | Pliers, Slip Joint, Andle Nose, Multiple Hole |
| 5120-21-639-3045 | Pliers, Lineman's |
| 5120-21-639-3047 | Pliers, Lineman's |
| 5120-21-639-3106 | Twister Wire, Plier W/wire Cutter 12" Nom Lg Fed Ggg-w-340 |
| 5120-21-639-3116 | Wedge Joing Breaking |
| 5120-21-639-3119 | Wedge Joint Breaking 4.000 in Lg 1.250 in w 0.312 in Thk Stl |
| 5120-21-639-3235 | Cleaning Tools, Paint Brush and Roller Cover, Spinner Type for Removing |
| 5120-21-639-3242 | Forceps |
| 5120-21-639-3316 | Shovel, Cgsb 39gp-4m Type 1 Class B |
| 5120-21-639-3320 | Shovel, Hand. Sq Pt. Blade 280 to 305mm Wide By 380 Mm Lg, Lg Handle. Open |
| 5120-21-639-3326 | Scoop Eastern Pattern Sq Pt 250 to 280mm |
| 5120-21-639-3327 | Scoop Eastern Pattern Sq Pt 18-3/4" ;g By 13-1/2" w Blade Open Bacl D Style |
| 5120-21-639-3788 | Hammer Hand Bricklayers 1 1/2" Nom Head Width P/n:bl24 |
| 5120-21-639-3803 | Head Hand Hammer Double Face 4 Lbs Nom |
| 5120-21-639-3836 | Hammer Head Long Pattern Striking 4 Lb Nominal |
| 5120-21-639-3883 | Head, Hand Hammer Ships Maul Style, 5lbs Nom Head Wt. |
| 5120-21-639-3894 | Handle, Cant Hook & Peavy 2 1/2" Dia.x 54" Lg |
| 5120-21-639-3896 | Mallet, Wood Rd Cross-sectional Shape, 5-1/2" Lg 2-1/4" Dia of Face 10"lg |
| 5120-21-639-3939 | Mallet Serving 1-1/4" Dia X 2" Long. with Wooden Handle |
| 5120-21-639-3942 | Mallet Serving 2" Dia X 3-1/2"-4" Length of Head Grooved in Lignum Vitae. |
| 5120-21-639-3946 | Serving Board, Rope, 4" Square Face Wjk P/n K-2078 |
| 5120-21-639-4073 | Pick Mattock Handles, Railroad or Clay Pick, 915.0 Mm |
| 5120-21-639-4080 | Jack Screw Hand 10 Ton Rated Cap 10-1/2" Closed Height |
| 5120-21-639-5139 | Marline Spikes 6" P/n 6395139 |
| 5120-21-639-5140 | Marline Spike, 8" Lg |
| 5120-21-639-5141 | Marline Spikes 10" P/n 6395141 |
| 5120-21-639-5142 | Marline Spike, 12" Lg |
| 5120-21-639-5145 | Marlin Spike Wire Rope Type 18" Lg O/a |
| 5120-21-639-5357 | Vice, Blacksmiths 6.0 in Nom Jaw w 6.0 in Nom Opening 28.0 in From Plate to |
| 5120-21-639-5363 | Vise, Machinists Stationary Base 6" Non Jaw w 9" Min Jaw Opng |
| 5120-21-639-5367 | Vise, Machinists, Swivel Base, 4" Nom Jaw w |
| 5120-21-639-5380 | Vise, Pipe, Hinged Jaw. |
| 5120-21-639-5425 | Clamp, Screw, Quick Adjusting, Dble Jar Type, Fixed Head 24 in Nom Jaw Opng |
| 5120-21-639-5427 | Clamp, Screw, Quick Adjusting, Double Jaw Type, Fixed Head, 48 In, Nom Jaw |
| 5120-21-639-5429 | Clamp, Screw, Quick Adjusting, Double Jaw Type, Fixed Head |
| 5120-21-639-5507 | Vise Machinists Swivel Base 8" Nom Jaw Width 12" Jae Opening Replaceable |
| 5120-21-639-5515 | Rivet Set, Handtools. |
| 5120-21-639-5834 | Punch & Die, Grommet Inserting Supplier P/n 217-2 |
| 5120-21-639-5888 | Bar, Wrecking, Gooseneck Claw and Pinch Point 3/4" |
| 5120-21-639-5901 | Crowbar Wedge Point 48" 53 |
| 5120-21-639-5932 | Palm, Sewing, Saming Type, R.h. Reinf Leather |
| 5120-21-639-5936 | Tweezers, Craftman's General Purpose Extra Blades |
| 5120-21-639-5940 | Hand Screw, Steel Spindle Screws |
| 5120-21-639-6195 | Pricker, Sailmakers 10" Nom Sz Ref: 1881 |
| 5120-21-639-6382 | Knife, Putty Stiff Blade |
| 5120-21-639-6462 | Hawk, Plasterer, S. Metal. |
| 5120-21-639-6729 | Puller Kit, 35 Items W/o Case All Parts Are Owatonna |
| 5120-21-639-6921 | Connector, Leg, U/w Pullerkit, Mechanical Owatonna Tool Co. P/n 916 |
| 5120-21-639-7294 | Anvil Blacksmith's Cast Iron Body W/steel Face and Horn,100 Lb Wt 3/4 In. |
| 5120-21-639-7351 | Tongs, Blacksmith, Straight Flat Lip |
| 5120-21-798-0666 | Wrench Adjustable 8" Palmera 271-415 Spec 39-gp-13m Type 1 Style a |
| 5120-21-798-0667 | Wrench Adjustable 10" Palmera 271-420 Spec 39-gp-13m Type 1 Style a |
| 5120-21-799-7431 | Wrench 3/4" Ratchet |
| 5120-21-799-7432 | Wrench 1" Ratchet |
| 5120-21-800-3897 | Stretcher Rubber Bulb and Tubing |
| 5120-21-800-6740 | Screwdriver, Flat Tip,adapter, Wrench, Paddle |
| 5120-21-801-0484 | Hammer Hand Sledge Blacksmiths Double Faced 4 Lb Nom Head Wt 39-gp-2a |
| 5120-21-802-1431 | Screwdriver, Offset, Nonsparking, Non-magnetic Opp Offset, Opp Ends, Ea |
| 5120-21-802-5600 | Flaring Tool, Tube Ahnd, Screw, Actuated. Swivel Cone, Hingedn Dies Type |
| 5120-21-803-2336 | Punch, Drift |
| 5120-21-803-2338 | Wrench, Adjustable, Monkey, Nonsparkling and Nonmagnetic |
| 5120-21-803-7950 | Jack Hydraulic Hand 8-1/4 Ton Capacity Self Contained |
| 5120-21-804-0697 | Shovel, Hand Nonsparking and Nonmagnetic Rd Point Blade 10" w X 12" Lg |
| 5120-21-804-9017 | Pot Melting Electric Glue Style Wet Type 2 Qt Cap, Thermostsat Control |
| 5120-21-805-4995 | Pot Melting Solder Stype 8" Od 4-1/2" Inside Depth |
| 5120-21-805-5967 | Blowtorch Alcohol Self Blowing Pressure Type 5-1/2" O/a Lg |
| 5120-21-805-9801 | Clamp C 1800 Lb Test Load 6" Nom Size, 6" Deep Throad Adjustable Clamp 176 |
| 5120-21-806-2166 | Socket, Socket Wrench |
| 5120-21-806-4321 | Wrench, Spanner, Comb Hose and Hydra Ny. 1.250 |
| 5120-21-806-5283 | Vise, Bench and Pipe, Swivel Base |
| 5120-21-807-6447 | Flaring Tool P/n Ta1301 |
| 5120-21-807-6477 | Flaring Tool, Tube, Hand Fixed Cone Hingeddies Type, Dsgn for 9.32 In. Size |
| 5120-21-807-6493 | Crowbar Wedge Point Type 7/8" Dia 36" Oal |
| 5120-21-808-5073 | Ladle 5" Dia X 2" Bowl |
| 5120-21-808-5112 | Extractor Set, Stuffing Box and Pump Packingw |
| 5120-21-808-5206 | Pliers, Retaining, Ring, Ext, Flat Jaws, Str Tips, 8 In. Nom Size |
| 5120-21-808-7407 | Vise, Woodworkers |
| 5120-21-811-0050 | Indicator Dial |
| 5120-21-812-3976 | Jack, Hydraulic, Hand 5 Ton Rated Cap Supplier P/n 5-51003 |
| 5120-21-815-1936 | Drill Stop, No 40 Drill Sz Supplier P/n Ds-40 |
| 5120-21-815-1938 | Drill Stop Uses No 28 Drill Size |
| 5120-21-815-1939 | Drill Stop, No 21 Drill Sz Supplier P/n Ds-21 |
| 5120-21-815-1942 | Drill Stop, Uses No 10 Drill Size, Cushion Break Through of Drill 54 |
| 5120-21-815-1950 | Drill Jig Plate Nut Two Lug Type for 6/32 or 6/40 Bolts |
| 5120-21-841-7378 | Wrench Socket, Single Socket "t" 8 Point, 3-3/8 In. Size 4 In. Long |
| 5120-21-842-7669 | Clamps, Screw, Quick Adjusting Jaw and Swivel Button Type. |
| 5120-21-842-8224 | Adaptor U/w Propellors |
| 5120-21-847-5696 | Hook, Insulator, Swivel Mounted, Aluminium Alloy |
| 5120-21-851-3650 | Wrench Box End and Open End Combination 10mm 12pt Box 4-7/8" or 123.8mm O/l |
| 5120-21-851-3742 | Handle Shovel Wood D-type 42" Nom Lg |
| 5120-21-851-4694 | Key, Socket Head Screw, Hex Type Supplier P/n 59640 |
| 5120-21-851-4695 | Key, Socket Head Screw, Hex Type Supplier P/n 59650 |
| 5120-21-853-6897 | Vise, Machinists Stationary Base, Supplier P/n 1105000 |
| 5120-21-853-7379 | Rake, Asphault |
| 5120-21-857-5731 | Tweezers Craftman's General Purpose 3mm Tip W, 115 Mm Lg O/a |
| 5120-21-857-6612 | Riveter Blind Hand Str Head Type 1/8" 5/32" and 3/16" Dia Rivets Accom W/o |
| 5120-21-857-7032 | Cup Suction Lifting 4" Dia |
| 5120-21-857-8843 | Vise, Machinistss Swivel Base |
| 5120-21-859-1790 | Wrench Pipe Nonsparking An Dnon Magnetic Str Jaw 0.250to2.000 (1/4 to 2) in |
| 5120-21-859-4877 | Wrench Pipe Strap Style 24" Handle Length 54" Strap Length 2-1/4" Strap |
| 5120-21-859-4878 | Hammer and Handle Components As Per Attached Drawing |
| 5120-21-860-6468 | Mallet Wood Rd Cross Sectional Shape |
| 5120-21-860-6481 | Mallet. Wood, Supplier P/n 89-1/2 Size 2 |
| 5120-21-863-0204 | Universal Joint, Socket Wrench Attachment P/n Mf25b |
| 5120-21-868-0323 | Key Set, Socket Head Screw, Hex, Supplier P/n 60120 |
| 5120-21-870-1049 | Bit, Screwdriver Hex Tip 0.219 in A/f 0.312 in Male Str Hex Drive Shackle 1.213 in |
| 5120-21-870-1050 | Bit, Screwdriver,phillips Type Cross Tip |
| 5120-21-870-2449 | Burnisher,contact, Plastic Handle. |
| 5120-21-870-2625 | Fid, Wire, Tapered,for Splicing Man-made Fibre. |
| 5120-21-870-2628 | Fid, Wire, Tapered |
| 5120-21-870-2631 | Fid, Wire Tapered, for Splicingman-made Fibre |
| 5120-21-870-2636 | Fid, Wire, Tapered, for Splicing Man Made Fibre |
| 5120-21-872-0519 | Puller Mechanical |
| 5120-21-872-1219 | Bit,screwdriver,phillips Type Cross Tip. |
| 5120-21-874-1964 | Extractor Plier Type Plastic Body Self Retaining and Self Closing Action |
| 5120-21-874-2641 | Installer, Bearing U/o 1.250. |
| 5120-21-877-4353 | Wrench Set, Combination Box & Open End |
| 5120-21-877-4725 | Key Socket Head Screw, Hex Type, Screwdriver Handle, Non Replacable Blade |
| 5120-21-878-2419 | Hammer Head Masons |
| 5120-21-878-2849 | Key Set, Socket Head Screw, Hex, Supplier P/n 81500 |
| 5120-21-878-2859 | Wrench Socket |
| 5120-21-878-2919 | Wrapping & Unwrapping Tool Manually Operated Double End |
| 5120-21-878-2929 | Wrench |
| 5120-21-878-2930 | Wrench |
| 5120-21-878-2931 | Wrench |
| 5120-21-878-2932 | Wrench 55 |
| 5120-21-878-2933 | Wrench |
| 5120-21-878-2934 | Wrench |
| 5120-21-878-2935 | Wrench |
| 5120-21-878-2936 | Wrench |
| 5120-21-878-2939 | Wrench |
| 5120-21-878-2940 | Wrench |
| 5120-21-878-2955 | Bit Wire Wrapping |
| 5120-21-879-8911 | Tacker,staple, Gun Type. |
| 5120-21-879-9151 | Key, Socket Head Screw, Hex Type, Supplier P/n 59617 |
| 5120-21-880-8396 | Wrench 41mm Open End |
| 5120-21-883-1263 | Key, Socket Head Screw, Hex Type, Supplier P/n 59615 |
| 5120-21-883-1452 | Grip Cable Jaw Parallel Type Steelbronze Lined Jaws Smooth Har Surface. |
| 5120-21-883-1482 | Wrench Spanner T Type |
| 5120-21-886-9805 | Gage |
| 5120-21-887-7249 | Screwdriver Cross Tip Pozidriv Type 3 in Blade Lg 6-1/4 in O/a Lg. Plastic Hndl |
| 5120-21-887-7321 | Key Set, Socket Head Screw, Hex, Supplier P/n 60125 |
| 5120-21-888-3959 | Jack Axel C/w Handle P/n D41502 |
| 5120-21-889-5236 | Fid Tubular Aluminum 3/8" Dia |
| 5120-21-889-5237 | Fid Tubular Aluminum 1/2" Dia |
| 5120-21-889-5238 | Fid, Tubular Alum. 5/8" Dia 14" Lg 1/2" Od |
| 5120-21-889-5239 | Fid Tubular Aluminum 6061-t6 Screw End, for Synthetic Dbl Braided Rope 3/4 |
| 5120-21-889-5328 | Fid Tublar Aluminum 6061-t6 14" 5/8" Rope |
| 5120-21-889-5986 | Socket, Socket Wrench 1/4" Sq Dr 9.0 Mm Sz, 6 Pt Reg Lg |
| 5120-21-893-0984 | Ratchet Head P/n 7618-02 |
| 5120-21-893-0986 | Adapter Torque Wrench P/n 7118-22 |
| 5120-21-893-9077 | Reset Tool, Lever Locking. 1/2" Dia, 2-1/2" Lg Nylon Handle 1/16" Dia, 1-1/2" Lg |
| 5120-21-895-4126 | Removal Tool Part of Checklist #l-49-070-188/lc-001 (s51-453) |
| 5120-21-896-7001 | Repair Kit |
| 5120-21-897-3784 | Wrench Spanner |
| 5120-21-897-3785 | Wrench Spanner C9 Type |
| 5120-21-897-3786 | Cap Vuce Haw C7 Type Drawing 8490127 |
| 5120-21-899-4861 | Fid 8" Lg |
| 5120-21-899-4862 | Fid 12" Lg |
| 5120-21-899-4863 | Fid 14" Lg |
| 5120-21-899-4865 | Fid Rock Maple, Tapered 10" Lg 1 1/4" Butt |
| 5120-21-899-4866 | Fid 16" Lg |
| 5120-21-899-4867 | Fid, Rock Maple, Tapered 18" Lg 2 3/8" Butt |
| 5120-21-899-5244 | Bar Timber Size 1" Dia 18" Long |
| 5120-21-899-5255 | Wrench Set Combination Box and Open End C/o 16 Items 12 Point Size 1/4" 1 |
| 5120-21-901-6372 | Wrench Set, Ratchet, Magnetic |
| 5120-21-901-6704 | Slide Hammer |
| 5120-21-903-3052 | Wrench, Spanner Size 36mm Hex |
| 5120-21-903-3138 | Jack P/n:2 0003-823 (replacing 453-6941-801) 56 |
| 5120-21-903-3431 | Splicing Kit P/n:2298-1 |
| 5120-21-905-9227 | Puller P/n 1sk17828 |
| 5120-21-905-9238 | Wrench P/n Its 146w |
| 5120-21-905-9640 | Wrench, Open End, Box. Flare Nut P/n 1949m-14x17 |
| 5120-21-905-9916 | Wrench |
| 5120-21-906-1722 | Inserter, Pin P/n Isk 22401 |
| 5120-21-906-1832 | Pliers Lineman's W/side Cutter 9-3/8" Lg O/l Plastic Coated Handles |
| 5120-21-906-5123 | Inserter and Remover Spring |
| 5120-21-909-0900 | Jack Screw Hand Side Winder Type 19" Retractred Height 32-3/4" Extended 5120-212-639-589 Punch and Dic, Grommet Inserting |
| 5120-99-120-6582 | Socket, Socket Wrench, 0.375 (3/8)' Sq. Dr. 0.448" (3/16 Bsw and 1/4 Bsf Size) 12 Pt. |
| 5120-99-120-6584 | Socket, Socket Wrench 1/2" Sq. Dr, 0.710 (3/8 Whitweorth Size) 12 Pt. Wrench |
| 5120-99-137-7380 | Key Set, Socket Head Screw L-type Hex Supplier P/n Mm10 |
| 5120-99-700-1653 | Socket, Socket Wrench, 0.375 |
| 5120-99-910-6363 | Socket, Socket Wrench 1/2' Sq Dr. 0.920' ( 1/2 Whitworth Size) 12 Pt. Wrench |
| 5120-99-910-6397 | Socket, Socket Wrench, 1/2' Sq Dr 1-13/64' |
Need items from FSC 5120?
Dibblee Industries supplies NATO-cataloged hand tools, non-edged, non-powered to government and industrial clients across Canada.
Request a Quote Call 1.514.694.9830